Bag-on-Valve Instant Foam Technology

By making use of the Bag-on-Valve Instant Foam Technology, the concentrated soaps are converted, during dispensing, into a rich, firm foam with high cleansing action. The cartridge consists of a laminated bag that is attached to a valve, a cartridge (tin), nozzle and cap. Pure air is injected between the can and the bag, before the bag is filled with soap. This increases the pressure and causes the bag to empty completely.

Dreumex Bag-on-Valve Instant Foam
Technology: up to 6 x more concentrated
Foam Soap

Only 0.2ml Foam Soap needed to wash hands

Thanks to the Bag-on-Valve Instant Foam Technology and highly concentrated Foam Soap, a dose of 0.2 ml Foam Soap per hand wash is adequate for optimum hand cleansing, whereas other touch free dispensers dose at least 0.4 ml per wash. Therefore 400 ml of soap is enough for 2,000 hand washes. This is more than the typical one liter pack of competitive products.


Usage with a manual dispenser is minimum 2 doses per hand wash. This makes the consumption of soap with some manual dispensers up to 10 times higher than with
Dreumex Omnicare.

  • Power
  • Mounting
  • Materials

  • Operation

  • LED indicator

  • Light sensor
  • Lock
  • Service life

  • Warranty

  • Sustainability

  • Range
  • 8 AA batteries included. Life span 1 year or 20,000 doses
  • Invisible using three screws or mounting tape (both supplied)
  • Dispenser: ABS plastic
    Cartridge: tin with laminated bag
  • Exclusively touch free
    Sensor with delay (2 seconds)
    Adjustable soap dosage: 0.2 ml - 1.5 ml
  • On/off (green light)
    Low battery (flashing orange light)
    Low soap (flashing red light)
  • Dispenser switches off in the dark to extend battery life
  • Dispenser is lockable using removable or permanent key
  • Minimum contact with sensitive parts due to touch free system
    New nozzle with each cartridge
  • 1 year standard warranty on the dispenser
    Upon registration at, free life-time warranty on dispenser
  • Cartridge uses pure air to build up pressure
    Contents used fully
    100% of tin waste is recyclable
  • All current and future products fit in the same dispenser